|
-
250 MHz IBM PowerPC
Processor (350 Mips)
- Linux Operating System
- 1 x Smartcard-Reader
- MPEG2 Hardware decoding
- Common available NIMs (DVB-S,
DVB-C)
- V.24/RS232 Interface
- 100Mbit full duplex
Ethernet Interface
- 2 LED status
- unlimited channel lists
for TV/Radio
- channel-change time
< 1 second
- full automatic service scan
- supports directly bouquet-lists
(indirect unlimited)
- supports EPG (electronic
program guide)
- supports multiple LNB-Switching
control (supports DiSEqC)
- fully adaptable OSD in many
languages (skin-support)
- SPDI/F Interface for digital
bit stream out (AC-3 / DTS)
- 1 x Scart-interfaces (fully
controlled by software)
DBS-Tuner:
Frequency Range 950 ˇ. 2150
MHz
Signal Level - 65 dBm ˇ. -
25 dBm
Signal-to-Noise Level 12 dB
max.
DBS-Tuner Input Connector
F-Type female
Input Impedance 75 Ohm
AFC +/- 3 MHz
Demodulation Shaped QPSK
Input Symbol rate 2 ˇ. 45
Mbaud/s, SCPC / MCPC
FEC Viterbi and Reed-Solomon
Viterbirate 1/2, 2/3, 3/4,
5/6, 7/8, automatic assimilation
Roll-off Factor 35 %
Demultiplexing according ISO
13818-1
Video decoder:
Video Compression MPEG-2 and
MPEG-1 compatible
Video Standard PAL G/ 25 Hz
Video Formats 4:3 / 16:9
Footage 16:9, automatic assimilation
for 16:9 TV-Device (over Scart)
Letterbox precolating for
4:3 TV-Device
Audio decoder:
Audiokompression MPEG-1 &
MPEG-2 Layer I and II
Audio Mode Dual (main/sub),
Stereo
Frequency: 32 kHz, 44.1 kHz,
48 kHz, 16 kHz, 22.05 kHz,
24 kHz
Output analog:
Output Level L/R 0,5 Vss on
600 Ohm
THD > 60 dB (1 kHz)
Crosstalk < -65 dB
Output digital:
Output Level 0,5 Vss on 75
Ohm
Sampled Data Filtering 32
kHz, 44.1 kHz, 48 kHz
S/PDIF-Output optical (AC3)
Video parameter:
Input Level FBAS 1 Vss +/-
0.3 dB on 75 Ohm
Teletext filter in conformity
with ETS 300 472 Standard
TV-Scart:
Output: FBAS,RGB,S-VHS over
OSD selectable
Serielle Interface
RS 232:
Typ RS232 bidirectional
Bitrate 115,2 kBit/s max.
Plug Connector SUB-D-9
Function Update of Firmware
and Preprogramming
Ethernet:
100 MBit compatible, bi-direktional
interface
Function Update of Firmware
and Preprogramming
LNB Power and polarisation:
LNB Current 500mA max. ; short-circuit-proof
LNB Voltage vertical <
14V without load, > 11,5V
at 400mA
LNB Voltage horizontal <
20V without load, > 17,3V
at 400mA
LNB shut-off at Standby-Mode
Count of active satellite
position:
DiSEqC 1.0/1.2 SAT
POSITION / SAT OPTION
DiSEqC - Rotor Control
Power consumption:
< 10W / 12V
Input voltage:
DC12V,alternating acurrent
+/- 15%
Extern power supply:
Input:
110-240V AC / 50-60Hz / 0,6A
Output:
12V = / 1A
Physical specification:
Ambient Temperature +15ˇăC...+35ˇăC
Humidity < 80%
Size (W x D x H): 195 mm x
130 mm x 40 mm
Weight: 1.5 kg
|
